Wind turbine blade is mounted on the wind turbine. Most wind turbines have three blades, though there are some with two blades. Blades are generally 30 to 50 meters 100 to 165 feet long, with the most common sizes around 40 meters 130 feet . Longer blades are being designed and tested. Blade weights vary, depending on the design and materials—a 40 meter LM Glasfiber blade for a 1.5 MW turbine weighs 5,780 kg 6.4 tons and one for a 2.0 MW turbine weighs 6,290 kg 6.9 tons .
The wind power generation industry has grown rapidly and expanded worldwide in recent years to meet high global demand for clean electricity. In addition, from 2008 to 2014, the cumulative global power generating capacity of wind turbine installations in GWs increased by more than three times. Wind energy is now used in over 80 countries, 24 of which have more than 1 GW installed. The rapid growth in the wind power generation industry has been driven by population growth and the associated increase in electricity demand, widespread emphasis on expanded use of renewable energy and water resource management, the increasing effectiveness and cost- competitiveness of wind energy and accelerated urbanization in developing countries, among other factors.
Rapid development of global wind energy stimulates the wind turbine blade market as well. Global wind turbine blade production increased from 60155 Units in 2013 to 80972 Units in 2015 with the GACR of 16.02%.
The development of larger wind turbines and recent improvements in wind blade design, materials and manufacturing technology have significantly increased the power generating capacity of wind turbines. Today, wind blades are typically composed of advanced, high-strength, lightweight and durable composite materials. In addition, longer wind blades, which allow for a larger area of wind to be swept by the wind blades, coupled with taller towers, results in greater energy capture and reduces the overall cost of wind energy.
According to the wind turbine, the blades can be divided into the 1.5 MW, 2.0 WM, 3.0 WM, 5.0 WM and so on. The size of blades has positive correlation with the powder of turbines. Blades manufacturers are keen on their blade technology innovation, no matter from the size or the key raw materials.
With the promising market of wind energy, more and more Companies have entered in the wind turbine field in the recent few years. However, LM Wind Power, Vestas, Enercon , Tecsis are still the leaders, when considering the technology and product performance. The four Companies accounted for about 22% production share in 2015.
China has become the faster and the most promising market of wind turbine blade in the recent two years. As information revealed, in 2015, China accounted for about nearly half of wind energy new installed capacity in the world. It is predicted that the wind turbine blade market in China will become more intensified in the coming years, as more and more international Companies cast attention on the region.
Access Full Report with TOC @ https://www.planetmarketreports.com/reports/wind-turbine-blade-market-2019-2024
According to this study, over the next five years the Wind Turbine Blade market will register a xx% CAGR in terms of revenue, the global market size will reach US$ xx million by 2024, from US$ xx million in 2019. In particular, this report presents the global market share sales and revenue of key companies in Wind Turbine Blade business, shared in Chapter 3.
This report presents a comprehensive overview, market shares, and growth opportunities of Wind Turbine Blade market by product type, application, key manufacturers and key regions and countries.
This study considers the Wind Turbine Blade value and volume generated from the sales of the following segments:
Segmentation by product type: breakdown data from 2014 to 2019, in Section 2.3; and forecast to 2024 in section 11.7.
1.5 MW
1.5 MW
1.5-2.0 MW
2.0 MW
2.0-3.0 MW
3.0 MW
3.0-5.0 MW
5.0 MW
Segmentation by application: breakdown data from 2014 to 2019, in Section 2.4; and forecast to 2024 in section 11.8.
Energy
Plastics
Composites
Other
This report also splits the market by region: Breakdown data in Chapter 4, 5, 6, 7 and 8.
Americas
United States
Canada
Mexico
Brazil
APAC
China
Japan
Korea
Southeast Asia
India
Australia
Europe
Germany
France
UK
Italy
Russia
Spain
Middle East & Africa
Egypt
South Africa
Israel
Turkey
GCC Countries
The report also presents the market competition landscape and a corresponding detailed analysis of the major vendor/manufacturers in the market.
The key manufacturers covered in this report: Breakdown data in in Chapter 3.
LM Wind Power
Vestas
Enercon
Tecsis
Gamesa
Suzlon
TPI Composites
Siemens
CARBON ROTEC
Acciona
Inox Wind
Zhongfu Lianzhong
Avic
Sinoma
TMT
New United
United Power
Mingyang
XEMC New Energy
DEC
Haizhuang Windpower
Wanyuan
CSR
SANY
In addition, this report discusses the key drivers influencing market growth, opportunities, the challenges and the risks faced by key manufacturers and the market as a whole. It also analyzes key emerging trends and their impact on present and future development.
Research objectives
To study and analyze the global Wind Turbine Blade consumption value & volume by key regions/countries, product type and application, history data from 2014 to 2018, and forecast to 2024.
To understand the structure of Wind Turbine Blade market by identifying its various subsegments.
Focuses on the key global Wind Turbine Blade manufacturers, to define, describe and analyze the sales volume, value, market share, market competition landscape, SWOT analysis and development plans in next few years.
To analyze the Wind Turbine Blade with respect to individual growth trends, future prospects, and their contribution to the total market.
To share detailed information about the key factors influencing the growth of the market growth potential, opportunities, drivers, industry-specific challenges and risks .
To project the consumption of Wind Turbine Blade submarkets, with respect to key regions along with their respective key countries .
To analyze competitive developments such as expansions, agreements, new product launches, and acquisitions in the market.
To strategically profile the key players and comprehensively analyze their growth strategies.
Customizations available
In case of any queries or customization requirements please connect with our sales team sales@planetmarketreports.com, which will ensure that your requirements are met.
Browse a Free Sample Report @ https://www.planetmarketreports.com/report-sample/wind-turbine-blade-market-2019-2024
About Us:
Planet Market Reports gives statistical surveying reports to businesses, people and associations with a goal of helping them in their decision making process. We have huge database of market research reports & company profiles across globe. We associated with global market research a publisher who has a wide range of research specialists & industry experts which provides you deeper penetration of market research industry.
We have statistical surveying reports from number of top publishers and update our reports collections on daily basis with most recent research data to furnish our customers with the moment online access to our database. With access to this database, our customers will be able to benefit from expert insights on worldwide businesses, items, and market patterns. We help you in your buy choice by mapping your data needs with our immense accumulation of reports.
Contact US:-
Name: Jennifer Daniel
Email-Id: sales@planetmarketreports.com
US: +1-716-2260907
UK: +447441952057
Organization: Planet Market Reports
